Maintaining a pool can be difficult, especially if you don’t have the right equipment or knowledge. With so many different tasks, such as cleaning, vacuuming, and filtering water, it can seem like a lot of work.
But maintaining a pool doesn’t have to be complicated. There are tools and tips that can help you keep your pool in the best condition, so you don’t have to worry about it being clean.
Keep your pool sparkling clean throughout the summer by implementing these effective pool cleaning tips that we are just about to share in this article. So, without further ado, let’s dive in.
1. Scrub Your Pool Tiles and Skim Through Them
Regularly cleaning your pool involves frequent vacuuming, skimming, and scrubbing.
Skimming is an integral part of pool maintenance. It’s a quick, easy thing to do that takes only a small amount of time. And yet, it can impact your pool’s appearance tremendously.
It removes debris from the water’s surface, keeping your pool looking cleaner, safer, and more inviting to guests.
On the other hand, scrubbing doesn’t have to be a daily task. You can scrub it once a week if you have a well-balanced pool. However, be sure to use a quality scrubbing brush to reach out to the pool corners well to clear out any stains and stubborn debris.
If you want to clean your pool but don’t have the time to do it manually, a robotic pool cleaner is an excellent option.
Cleaners such as the dolphin proteus dx3 robotic pool cleaner is an excellent choice. They are capable of powering and navigating around any pool to thoroughly scrub every bit of dirt and debris from the bottom and sides.
2. Inspect the Filter
The most overlooked aspect of pool maintenance is often the filter. If you don’t inspect the filter regularly, you can end up with a stagnant, dirty pool that isn’t nearly as inviting.
Essentially, it’s best to inspect the filter thoroughly after a heavy storm and clean it immediately. That’s because heavy rain and bad weather can lead to a clogged-up filter that might even be required to be replaced.
You can also hire a maintenance company to regularly check your pool filtration process to determine how often the filter needs to be cleaned. A good rule of thumb is to clean out the filter at least once a month.
3. Check the Water Level and Quality
It’s essential to check the water conditions of your pool at least once a week. You’ll want to check your pool more often during the winter months.
Also, check the chlorine levels and pH balance on a regular basis. Over time, pools lose water and become murkier, so you’ll have to add more chemicals to maintain a healthy pool water quality.
4. Absorb the Oil with a Tennis Ball
Pool water sucks the oil out of anything you put in it. Everything can be left behind inside the pool water – from body lotions to sunscreen oil – once you exit the pool. It gets full of contaminants. But luckily, there’s an easy solution: throw tennis balls into the water.
Using tennis balls to clean a pool may seem unusual, but it is an excellent way to save time and money. These balls are made of special fabrics that absorb the oils, preventing them from leaving a slick sheen on top of the water.
Tennis balls are inexpensive, colorless, and can remain afloat. It means that they don’t interfere with filtration systems or damage pool liners when they are thrown in the water.
5. Remove Stains Using Vitamin C or Lemon Slices
Cleaning off metal deposits and permanent stains keeps your pool looking its best and helps keep chemical levels in the water safe.
Metal or other stains are an eyesore that can make your pool look old and dingy. To remove them, you don’t need anything fancy—just a few vitamin-C tablets. Drop one or two into a bucket of water and give the stains a good scrubbing.
If you don’t have any tablets, simply cut up a few lemons and throw them in the water. Then you can easily scrub it a little to ensure the proper removal of the stains.
6. Use Sponge and Vinegar Solution to Remove Water Scales
Neglecting to maintain the sanitation of your pool will lead to expensive repairs down the line.
The best solution is to keep your filters, heaters, and pumps in pristine condition and remove specific water scales with a sponge and vinegar solution.
Vinegar is a great solution for cleaning and de-scaling pool water scales, clogged-up filters, and pumps. Simply mix half a bowl of vinegar with warm water and apply it to the stains. After several minutes, scrub them gently with a sponge and rinse them out.
7. Set an Automatic Pool Cover
An automated pool cover is the best way to preserve your pool’s quality.
With just a push of a button, a pool cover will slam shut and keep sunlight, debris, and water out of your pool while preserving your water’s chemical balance.
A device like this can save you money in the long run by reducing the time it takes to maintain your pool and consistent chemical levels.
8. Run Your Pool Pump Twice a Day
Running your pool pump twice a day is vital to maintaining a healthy pool. As pools are often used several times per week and even twice a day, you must keep your pump running more often for the best results.
Keeping the water circulation moving through your pipes will keep your chemicals balanced in the water and prevent any sort of bacterial buildups that could cause trouble in the future.
9. Power Wash to Clean the Pool Deck
Cleaning your pool deck is just as important as cleaning the pool itself. Power washing can remove any dirt or other contaminants built up over time. You can easily rent a power washer from a home improvement store near you.
However, to perform the deck cleaning process on your own, sweep away any dirt and debris accumulated on the surface. Some people find that wearing heavy-duty work gloves makes this process easier. Then, simply assemble the machine and make sure all the connections are tightened before spraying.
While operating the power washer, remember to keep the nozzle several feet away from the deck and never let it touch the surface. Doing so will cause damage and possibly even permanent stains.
10. Hire a Professional to Clean Your Pool
Professional pool servicing is a necessity. It’s good to get at least one professional servicing for your pool every year to ensure that it remains in good shape.
Swimming pool professionals can help maintain all the aspects of your swimming pool. They are exceptionally knowledgeable about the equipment that makes your pool work — from filters, pumps, and heaters to the walls and floor around it.
They can quickly spot problems and develop solutions that decrease water loss, energy costs, and wear on your pool with their expertise.
If you’re not ready to hire someone on a regular basis, there are companies that provide a flexible service model that represents great value without compromising quality.
Additional Pool Maintenance Tips
Here are some additional pool maintenance tips that can help you keep your pool in excellent condition:
- Vacuum the pool floor regularly to get rid of dirt, leaves, and other debris.
- Balance your chemical levels to reach a PH of 7.2 — 7.6.
- Use bromine or chlorine substances to help sanitize the water.
- Test your water every week for proper chlorine concentration.
- Clean your filter regularly to ensure maximum water flow.
- Replace pool water with fresh water every other day.
In this article, we’ve shared plenty of pool cleaning tips that you can use to maintain your pool in the best possible way.
From cleaning the floor and testing the water to running chemical processes, it’s always essential to keep up with a schedule for cleaning and maintaining your pool. This way, you’ll be able to catch any minor issues early on and fix them before they get out of control.
It’s time you trust in your own ability and don’t always wait for a professional to do the job of cleaning your pool.
FAQs
1. What is the fastest way to clean a dirty pool?
You should use chemical cleaners if you want to quickly clean a pool with stains. If you want to avoid chemicals, then use lime or vinegar for stain removal and follow it up with a pool vacuum cleaner for fast cleaning.
2. How do I make my pool water crystal clear?
Chlorine is a chemical compound used in water purification. It’s also one of the most popular treatments for keeping swimming pool water clean and healthy. To ensure that your pool is clean, we recommend adding chlorine.
3. Will baking soda clear a green pool?
Limestone deposits cause green pool water on tile surfaces and other hard surfaces in the pool. Baking soda is an excellent substance for restoring pool water clarity and removing unsightly calcium and iron deposits in pools.
